• A complete H Type coupling is comprised of two standard H Type hubs, two inside sleeves, one cushion set, and one collar with hardware. (H Type hubs are supplied with an inside sleeve.)
Unit of Measure



N/A H3567 HUB 2-5/8 N/KW N/SS RSB

Hub Style

N/A 3

Coupling Type

N/A Jaw


N/A Ductile Iron


N/A Gray/Metallic

Bore Type

N/A Rough Stock Bore

# of Jaws

N/A 7

Elastomeric Member

N/A SOX (NBR) Rubber


N/A 80.11 lb

Dimensional Data

Rough Stock Bore

N/A 2 5/8 in

Coupling Size

N/A H3567

Set Screw Size (Dimension T)

N/A No Setscrew

Length thru Bore

N/A 5.000 in127.00 mm

Outside Diameter

N/A 11.000 in279.40 mm

Dimension HD

N/A 7.750 in196.85 mm

Min. Bore (Dimensions ID1/ID2)

N/A 2.625 in66.68 mm

Max. Bore (Dimensions ID1/ID2)

N/A 5.000 in127.00 mm

Hub Length

N/A 7.380 in187.45 mm

Cubic inches

N/A 892.98000 in³

Performance Data

Nominal Torque

N/A 46632.00 in·lb

Max. Speed

N/A 2100 rpm

Rated HP at 100 rpm

N/A 74.00 hp

Rated HP at 1,200 rpm

N/A 888.00 hp

Rated HP at 1,800 rpm

N/A 1332.00 hp

Spider Performance

Spider Performance

  • Nitrile Butadiene (Buna N) Rubber is a flexible elastomer material that is oil resistant, resembles natural rubber in resilience and elasticity and operates effectively in temperature range of -40° to 212° F (-40° to 100° C). Good resistance to oil. Standard elastomer. (Also applies to SXB Cushions.)



  • Greater torque and bore capacity than the C-Line series jaw coupling
  • Elastomeric cushions are radially removable
  • Cushions available in SXB rubber and Hytrel



  • RSB (Rough Stock Bore) hub has No Keyway or set screw hole.
  • RSB bores should not be used as shown and may need additional machining to reach proper tolerances.