Where the world turns for couplings
Search Catalog
      GO   
 All Categories    TF (Front Mount) Type Flanges for use with Taper-Lock® Bushings
All Categories > Couplings & Power Transmission Parts Catalog > S-Flex Couplings > TF (Front Mount) Type Flanges for use with Taper-Lock® Bushings > Item # 68514462265  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 68514462265, TF (Front Mount) Type Flanges for use with Taper-Lock® Bushings



  • Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal
  • TF Type flanges allow for mounting the bushing on the front (hub) side of the flange
  • TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types.

Image




Specifications  · Dimensional Data  · Performance Data  · Notes

Specifications

Description 

6TF FLNG TAPER-STD UNC THREAD

Coupling Size

6TF

Type

Coupling Flange

Material

Cast Iron

Weight

17.00 lb

Color

Gray

Bore Type

Bored to Accept 1008 Taper Lock Bushing

Mount Type

Front

Bushing Required

1215/1210

Coupling Type

S-Flex

UNC Flange UPC Number

62265


Dimensional Data

Keyway Size (W x D)

No Keyway

Hub Diameter

2.810 in
71.37
mm

Dimension L

1.560 in
39.62
mm

Outside Diameter

4.000 in
101.60
mm

Overall Length

4.00 in
101.60
mm

Max. Bore (Dimensions ID1/ID2)

1.250 in
31.00
mm

Dimension FL

0.780 in
19.81
mm

Dimension G

0.88 in
22.35
mm

Dimension P

0.780 in
19.81
mm

Dimension R

1.090 in
27.69
mm

Bushing Screw Size

3/8-16

Cubic inches

24.96000 in³


Performance Data

Nominal Torque (with EPDM Sleeve)

450 in·lb

Max. Speed

6000 rpm

Torsional Stiffness

1718.00 in·lb/rad

Rated HP at 100 rpm for 1.0 Service Factor

0.70 hp

Rated HP at 1,200 rpm

8.60 hp

Rated HP at 1,800 rpm

12.90 hp

Rated HP at 3,600 rpm

25.70 hp


Notes

Notes 

  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.


 MORE IMAGES 

·  S-Flex Coupling Misalignment


 DOWNLOADS 

S-Flex Catalog
(PDF, 0KB)

S-Flex Installation Instructions
(PDF, 0KB)

S-Flex Bushing Type Installation Video