• Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal
  • TF Type flanges allow for mounting the bushing on the front (hub) side of the flange
  • TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types.
Unit of Measure

Specifications

Description 

N/A 7TF FLNG TAPER-STD UNC THREAD

Coupling Size

N/A 7TF

Type

N/A Coupling Flange

Material

N/A Cast Iron

Weight

N/A 17.00 lb

Color

N/A Gray

Bore Type

N/A Bored to Accept 1108 Taper Lock Bushing

Mount Type

N/A Front

Bushing Required

N/A 1215/1210

Coupling Type

N/A S-Flex

UNC Flange UPC Number

N/A 62269

Dimensional Data

Keyway Size (W x D)

N/A No Keyway

Hub Diameter

N/A 2.810 in71.37 mm

Dimension L

N/A 1.840 in46.74 mm

Outside Diameter

N/A 4.620 in117.35 mm

Overall Length

N/A 3.940 in100.08 mm

Max. Bore (Dimensions ID1/ID2)

N/A 1.250 in31.00 mm

Dimension FL

N/A 0.780 in19.81 mm

Dimension G

N/A 1 in25.40 mm

Dimension P

N/A 0.690 in17.53 mm

Dimension R

N/A 1.310 in33.27 mm

Bushing Screw Size

N/A 3/8-16

Cubic inches

N/A 39.27370 in³

Performance Data

Nominal Torque (with EPDM Sleeve)

N/A 725 in·lb

Max. Speed

N/A 5250.00 rpm

Torsional Stiffness

N/A 2769.00 in·lb/rad

Rated HP at 100 rpm for 1.0 Service Factor

N/A 1.20 hp

Rated HP at 1,200 rpm

N/A 14.00 hp

Rated HP at 1,800 rpm

N/A 21.00 hp

Rated HP at 3,600 rpm

N/A 41.00 hp

Notes

Notes 

N/A
  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.