Where the world turns for couplings
Search Catalog 
 All Categories    L Type Spiders - Solid Centers
All Categories > Couplings & Power Transmission Parts Catalog (Beta) > Jaw Couplings (Beta Catalog) > L Type (Standard Jaw) Components > L Type Spiders - Solid Centers > Item # 68514411993  
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Item # 68514411993, L Type Spiders - Solid Centers

  • The L Type coupling consists of two standard L Type hubs and one spider.

Solid Center Spiders - Metric

larger image

Solid Center Spiders - Metric-2

larger image

Specifications · Dimensional Data · Performance Data · Spider Performance · Elastomers in Compression




Coupling Type




Insert Style





Elastomeric Insert


0.26 lb

Dimensional Data

Coupling Size


Dimension A

3.750 in
95.25 mm

Dimension B

0.590 in
14.99 mm

Dimension DC

0.210 in
5.33 mm

Dimension H

1.250 in
31.75 mm

Dimension W

0.88 in
22.35 mm

Cubic inches

12.37500 in³

Performance Data

Normal Temperature Range

-60 to 250 ºF
-51 to 121 ºC

Nominal Torque

3708.00 in·lb
419.00 N·m

Angular Misalignment

0.50 º

Parallel Misalignment

0.150 in

Shore Hardness


Damping Capacity


Chemical Resistance


Spider Performance
  • Hytrel is a flexible elastomer designed for high torque and high temperature operations. Hytrel can operate in temperatures of -60° to 250° F (-51° to 121° C) and has an excellent resistance to oil and chemicals. Not recommended for cyclic or start/stop applications.

Elastomers in Compression
    Lovejoy offers four types of elastomer designs to allow for additional flexibility in addressing specific application requirements. One piece designs are used in the “L” and “AL” models (referred to as spiders) and multiple part “load cushions” are used in the “C” and “H” model couplings. The load cushions are in sets of 6 to 14 pieces depending on coupling size.
Solid Center Spider
  • The solid center design is commonly used design when shafts of the driver and driven equipment can be kept separate by a standard gap
Open Center Spider
  • The open center design allows for the shafts of the driver and driven to be positioned within a short distance
  • Open center spiders offer shaft positioning flexibility but have a lower RPM capacity (1,750 RPM maximum for NBR, 3,600 maximum for Urethane/Hytrel®)
  • Used exclusively for the C and H Type couplings
  • Load cushions are held in place radially by a steel collar which is attached to one of the hubs
Snap Wrap Flexible Spider
  • Design allows for easy removal of the spider without moving the hubs
  • Allows for close shaft separation all the way up to the hubs maximum bore
  • Maximum RPM is 1,750 RPM with the retaining ring, but if used with the LC Type (with collar) the normal RPM rating of the coupling applies
  • Style is available in NBR and Urethane only, and in limited sizes


 width= Jaw Type Catalog (full catalog)

 width= Installation Instructions for Jaw Type Couplings

 width= Installation Video for Jaw Type Couplings

Request Information