Where the world turns for couplings
Search Catalog
      GO   
 All Categories    U Type without Keyway, Short Version - Inch (Imperial) Bores
All Categories > Couplings & Power Transmission Parts Catalog > Specialty Products - Deltaflex, Uniflex, Saga, Rigid Sleve, Shaft Collars > Uniflex Couplings > U Type without Keyway, Short Version - Inch (Imperial) Bores > Item # 68514413103  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 68514413103, U Type without Keyway, Short Version - Inch (Imperial) Bores



U Type Shaft-to-Shaft
    The U Type is the basis for all Uniflex couplings. It is a shaft-to-shaft flexible coupling with a simple one piece design, making it ideal for indexing, robotic or positioning applications. The U Type consists of a triple-wound flexible steel spring brazed to a steel hub at each end. This all steel design ensures optimum equipment protection in severe environments and/or high temperature applications. Regular and short versions are available for most sizes to accommodate different overall length requirements. Special hub or bore modifications are also possible. These units can be supplied with either pin holes or with keyways and set screws. Lovejoy does not recommend the reboring of uniflex couplings by customers due to potential damage to the brazed joint.
    This is a durable one-piece flexible coupling for general purpose shaft-to- shaft applications. It is the basis for all Uniflex coupling types.





Specifications  · Dimensional Data  · Performance Data  · Coupling Design  · Notes

Specifications

Description 

U37S CPLG 3/8X3/8 N/KW W/SS

Hub Style

Short

Type

Shaft-to-Shaft

Material

Steel

Weight

0.22 lb

Weight (Complete Coupling w/ Max. Bores)

0.27 lb

Color

Gray/Metallic

Bore Type

Finished Bore


Dimensional Data

Bore Size   

3/8 x 3/8 in

Hub Size

U37S

Set Screw Thread Size (Dimension T)

10-24

Keyway Size (W x D)

No Keyway

Dimension HD

0.860 in
21.84
mm

Overall Length

1.650 in
41.91
mm

Pin Location (Dimension SL)

0.250 in

Length thru Bore

0.520 in
13.21
mm

Min. Bore (Dimensions ID1/ID2)

0.250 in
6.00
mm

Max. Bore (Dimensions ID1/ID2)

0.375 in
9.53
mm

Bore Dia. [Max] 

0.375 in
10.00
mm

Cubic inches

1.22034 in³


Performance Data

Operating Temperature Range

-40 to 250 ºF

Max. Torque

39.00 in·lb

Max. Speed

30000.00 rpm

Axial Misalignment (∆ Ka)

0.015 in
0.38
mm

Max. Parallel Misalignment

0.009 in
0.23
mm

Wind-Up Angle at Nominal Torque

1.09 º

Wind-Up Angle at Max. Torque

3.00 º

Rated HP at 100 rpm

0.06 hp

# of Set Screws Required per Hub

1


Coupling Design
Flexible Spring Type Coupling with Exclusive Triple Wound Spring Design
    The Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.




Notes

Notes 

  • Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.
  • OAL Tolerance: + 1/8 inch.


 DOWNLOADS 

Specialty Products Catalog
(PDF, 0KB)

Uniflex Installation Instructions
(PDF, 0KB)