Where the world turns for couplings
Search Catalog
      GO   
 All Categories    Model 145 Spring-Loaded Driver Pulleys - Imperial
All Categories > Couplings & Power Transmission Parts Catalog > Variable Speed Drives > Aluminoline Series Variable Speed Drives > Model 145 Spring-Loaded Driver Pulleys - Imperial > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model 145 Spring-Loaded Driver Pulleys - Imperial

Check up to five results to perform an action.


Two-Side Moveable
1/3 through 1-1/2 HP
“A” and “B” Belts
      Aluminoline variable speed pulleys are designed for the best possible belt alignment with the least amount of overhung load. Flanges are made of a lightweight, corrosion-resistant aluminum, which is hard-coat anodized for long life. The aluminum flanges provide quiet operation with minimum vibration. These pulleys are used with classical “A” and “B” drive belts. Aluminoline pulleys offer maximum service when lubricated through a convenient grease fitting located on the end of the pulley shaft.

    Belt Selection
      Aluminoline variable speed pulleys are designed to drive standard “A” and “B” section belts. Due to the intermeshing flange design, it is best to use a wrapped belt or one without cogs.

    Adjustable Center Drives
      The typical adjustable center drive consists of the Aluminoline pulley mounted on the motor shaft, a companion sheave on the driven shaft, an adjustable motor base and a belt. Standard “A” and “B” fixed diameter sheaves should be used as driven companion sheaves. Belt alignment will be maintained throughout the speed range because the Aluminoline pulleys are two-side moveable. Due to the minimal bottom contact area of “A” and “B” belts, flat driven sheaves are NOT recommended.




Compare Items
   
  Results 1 - 3 of 3 1 

Item #

Description 

Bore Diameter 

Belt Size

Keyway Size 

Outside Diameter

Max. Pitch Diameter (Dimension PD)

Min. Pitch Diameter (Dimension PD)

68514418523 145 1/2 PULLEY 1/2 in A 1/8 x 1/4 in 4.50 in 4.250 in 2.100 in
68514418525 145 5/8 PULLEY 5/8 in A 3/16 x 3/32 in 4.50 in 4.250 in 2.100 in
68514418526 145 3/4 PULLEY 3/4 in A 3/16 x 3/32 in 4.50 in 4.250 in 2.100 in
  Results 1 - 3 of 3 1