Where the world turns for couplings
Search Catalog
      GO   
 All Categories    Hexadrive Series Model HLA-7 Adjustable Pulleys w/ Hexact Linear Actuation Method - Imperial
All Categories > Couplings & Power Transmission Parts Catalog > Variable Speed Hexadrive Series Pulleys > Hexact Linear Actuation Method > Hexadrive Series Model HLA-7 Adjustable Pulleys w/ Hexact Linear Actuation Method - Imperial > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Hexadrive Series Model HLA-7 Adjustable Pulleys w/ Hexact Linear Actuation Method - Imperial

Check up to five results to perform an action.


Hexact Linear Actuation Method
    The HLA adjustable pulley can be used in place of the standard “HM” pulley where an external mechanical control is available. Typical control methods include hydraulic cylinder, air cylinder, and lever. The adapter nut located on the end of the HLA pulley will accept a threaded rod or a clevis with cross pins. The actuator linkage must be on the center line of the pulley, but radial freedom is required to relieve loads caused by misalignment of the linkage. Actuation rate (closing the moveable flange) should not exceed 2-1/2 inches per minute.

    To specify the correct pulley, simply substitute the HLA prefix for the HM. For example, the Model HLA-7 pulley has the same drive characteristics as the Model HM-7 handw heel-type pulley. Refer to the adjacent chart for dimensional information. A torque arm bracket is NOT required for the HLA drive.




Compare Items
   
  Results 1 - 2 of 2 1 

Item #

Description 

Bore Diameter 

Type

Outside Diameter

Overall Length

Belt Top Width (Dimension B)

Sort by

Bore Depth (Dimension E)

68514435866 HLA-7 1-3/8 PULLEY 1 3/8 in Adjustable Center - Driver 10.000 in 10.170 in 1.810 in 6.000 in
68514442926 HLA-7 1-1/8 PULLEY 1 1/8 in Adjustable Center - Driver 10.000 in 10.170 in 1.810 in 6.000 in
  Results 1 - 2 of 2 1