Where the world turns for couplings
Search Catalog
      GO   
 All Categories    UFH Type without Keyway, Regular & Short Version - Inch (Imperial) Bores
All Categories > Couplings & Power Transmission Parts Catalog > Specialty Products - Deltaflex, Uniflex, Saga, Rigid Sleve, Shaft Collars > Uniflex Couplings > UFH Type without Keyway, Regular & Short Version - Inch (Imperial) Bores > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

UFH Type without Keyway, Regular & Short Version - Inch (Imperial) Bores

Check up to five results to perform an action.


UFH Type - Flange-to-Shaft
    A flange-to-shaft configuration, this couples flange mounted equipment to a shaft with all the benefits of Uniflex versatility. The stock flange plate is the same as used on the UF Type.

    The one-piece UFH Type coupling is similar to the U Type, except that one hub is replaced by a flange plate. Stock flange sizes are shown in the Dimensional Data table below but other sizes can be made to order. As with the other Uniflex styles, this coupling compensates for high degrees of angular and parallel misalignment with very little backlash or windup and is reliable in harsh or severe environments.

    Regular and short versions are available for each size to accommodate different overall length requirements. For increased versatility, the hub can be modified with a tapered, spline, hex or square bore. The standard hub is furnished with either a pre-drilled pin hole or with a keyway and set screw. Specify when ordering.
    Note: The UFH Type coupling does not come with assembly hardware. Assembly hardware must be purchased separately.





 DOWNLOADS 

Specialty Products Catalog
(PDF, 0KB)

Uniflex Installation Instructions
(PDF, 0KB)

Compare Items
   
  Results 1 - 6 of 6 1 

Item #

Description 

Bore Size 

Hub Style

Keyway Size

Dimension HD

Overall Length

Max. Torque

68514413851 UFH50R CPLG 5/16 N/KW W/SS 5/16 in Regular No Keyway 1.040 in
26.42
mm
2.030 in
51.56
mm
82.00 in·lb
68514413853 UFH50R CPLG 3/8 N/KW W/SS 3/8 in Regular No Keyway 1.040 in
26.42
mm
2.030 in
51.56
mm
82.00 in·lb
68514413854 UFH50R CPLG 1/2 N/KW W/SS 1/2 in Regular No Keyway 1.040 in
26.42
mm
2.030 in
51.56
mm
82.00 in·lb
68514413859 UFH75R CPLG 3/8 N/KW W/SS 3/8 in Regular No Keyway 1.420 in
36.07
mm
2.580 in
65.53
mm
175.00 in·lb
68514413860 UFH75R CLPG 1/2 N/KW W/SS 1/2 in Regular No Keyway 1.420 in
36.07
mm
2.580 in
65.53
mm
175.00 in·lb
68514413868 UFH75S CPLG 1/2 N/KW W/SS 1/2 in Short No Keyway 1.420 in
36.07
mm
2.000 in
50.80
mm
175.00 in·lb
  Results 1 - 6 of 6 1