Where the world turns for couplings
Search Catalog
      GO   
 All Categories    UFH Type with Keyway, Regular Version - Inch (Imperial) Bores
All Categories > Couplings & Power Transmission Parts Catalog > Specialty Products - Deltaflex, Uniflex, Saga, Rigid Sleve, Shaft Collars > Uniflex Couplings > UFH Type with Keyway, Regular Version - Inch (Imperial) Bores > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

UFH Type with Keyway, Regular Version - Inch (Imperial) Bores

Check up to five results to perform an action.


UFH Type - Flange-to-Shaft
    A flange-to-shaft configuration, this couples flange mounted equipment to a shaft with all the benefits of Uniflex versatility. The stock flange plate is the same as used on the UF Type.

    The one-piece UFH Type coupling is similar to the U Type, except that one hub is replaced by a flange plate. Stock flange sizes are shown in the Dimensional Data table below but other sizes can be made to order. As with the other Uniflex styles, this coupling compensates for high degrees of angular and parallel misalignment with very little backlash or windup and is reliable in harsh or severe environments.

    Regular and short versions are available for each size to accommodate different overall length requirements. For increased versatility, the hub can be modified with a tapered, spline, hex or square bore. The standard hub is furnished with either a pre-drilled pin hole or with a keyway and set screw. Specify when ordering.
    Note: The UFH Type coupling does not come with assembly hardware. Assembly hardware must be purchased separately.





 DOWNLOADS 

Specialty Products Catalog
(PDF, 0KB)

Uniflex Installation Instructions
(PDF, 0KB)

Compare Items
   
  Results 1 - 11 of 11 1 

Item #

Description 

Bore Size 

Keyway Size 

Dimension HD

Overall Length

Max. Torque

68514413855 UFH50R CPLG 1/2 1/8X1/16KW 1/2 in 1/8 x 1/16 in 1.040 in
26.42
mm
2.030 in
51.56
mm
82 in·lb
68514413862 UFH75R CPLG 5/8 3/16X3/32KW 5/8 in 3/16 x 3/32 in 1.420 in
36.07
mm
2.580 in
65.53
mm
175 in·lb
68514413865 UFH75R CPLG 3/4 3/16X3/32KW 3/4 in 3/16 x 3/32 in 1.420 in
36.07
mm
2.580 in
65.53
mm
175 in·lb
68514413879 UFH87R CPLG 5/8 3/16X3/32KW 5/8 in 3/16 x 3/32 in 1.730 in
43.94
mm
2.820 in
71.63
mm
346 in·lb
68514413880 UFH87R CPLG 3/4 3/16X3/32KW 3/4 in 3/16 x 3/32 in 1.730 in
43.94
mm
2.820 in
71.63
mm
346 in·lb
68514413884 UFH100R CPLG 1/2 1/8X1/16KW 1/2 in 1/8 x 1/16 in 2.11 in
53.59
mm
3.140 in
79.76
mm
565 in·lb
68514413898 UFH125R CPLG 1-1/8 1/4X1/8KW 1 1/8 in 1/4 x 1/8 in 2.170 in
55.12
mm
3.75 in
95.25
mm
755 in·lb
68514413899 UFH125R CPLG 1-1/4 1/4X1/8KW 1 1/4 in 1/4 x 1/8 in 2.170 in
55.12
mm
3.75 in
95.25
mm
755 in·lb
68514413896 UFH125R CPLG 3/4 3/16X3/32K 3/4 in 3/16 x 3/32 in 2.170 in
55.12
mm
3.75 in
95.25
mm
755 in·lb
68514445397 UFH137R CPLG 1-1/8 1/4X1/8KW 1 1/8 in 1/4 x 1/8 in 2.54 in
64.52
mm
4.030 in
102.36
mm
1260 in·lb
68514413915 UFH150R CPLG 1-3/8 5/16KW 1 3/8 in 5/16 x 5/32 in 2.980 in
75.69
mm
4.860 in
123.44
mm
1890 in·lb
  Results 1 - 11 of 11 1